Home > Products > Lithium Polymer Battery> 2000mAh-5000mAh


Hunan Auk New Energy Co.,Ltd
Tel: +86-731-82807935
Fax: +86-731-82807931
Email: info@aukpower.com

Add: 21F, Yashang Building 1, No.66 Zhongyi Road, Yuhua District, Changsha,Hunan,China 410004

Lipo battery cell 3.7v 3500mah lithium ion battery tablet pc battery pack

Features of Prismatic rechargeable single cell :    
1. High temperature resistance
2. High working voltage for single battery cells
3. Pollution-free
4. Long cycle life(≥500 times)
5. No memory effect
7. With short-circuit production function, safe and reliable
8. Factory price& High quality
9. No self discharge
10. Light weight, small size

Product introduction:

Lipo battery cell 3.7v 3500mah lithium ion battery tablet pc battery pack 


Name Li polymer battery 3.7V 3500mAh 104468 for tablet
Model AUK 104468
Size Thickness × Width × Length (mm)

10.0±0.5×44.0±0.5×68.0 ± 0.5

Nominal voltage 3.7V 
Nominal capacity 3500mAh
Max charge current 1C
Charging method charge with constant current 1C to 4.2V, then charge with constant voltage 3.0V  till charge current is less than 0.01C
Max discharge current  1C
Discharge cut-off voltage 3.0 V,  the over-discharge detection voltage of  PCM
Operating environment  Charging, 0°C ~ 65°C ;  65±20%RH  
Discharging, -20°C~80°C ;  65±20%RH
Storage environment -20°C~45°
storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH;3.7~3.9V
CycleLife(80%Prime Capacity) : >500times   
warranty Period of warranty: 12 months after sales

With protection board PCM for over charging, over discharging,short circut,over voltage.

*Using the charger designated by the manufacture(AEC).
*Don't throw the battery in fire or heat it.
*Don't short-circuit.
*Don't unpack the battery or change its structure.
Pack design * Battery pack should have sufficient strength and battery should be protected from mechanical shock
* No cell movement in the battery pack should be allowed.
* No Sharp edge components should be inside the pack containing the battery.
Charging  Charging current and charging voltage should be less than  specified in the Product Specification.
The charger shall be designed to comply with  Product Specification.
It is dangerous that charging with higher curren or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance.